Light Duty Belt Driven Lathe Machine - Exporter, Manufacturer & Supplier, Rajkot, India

To inquire, Select Product/s & Click on

Product Code : Model: Trainer B-45

[Select]

Product Specification

Light Duty Belt Driven Lathe Machine

Specification

Capacity	150	165	175
Height of Centre	150 mm	165 mm	175 mm
Swing over Bed	295 mm	325 mm	345 mm
Swing over Cross Slide	150 mm	180 mm	200 mm
Movement of Cross Slide	215 mm	225 mm	225 mm
Swing in Gap	-	-	-
BED
Bed Type	2 'V' & 2 Flat	2 'V' & 2 Flat	2 'V' & 2 Flat
Bed Width	240 mm	240 mm	240 mm
Width of Ga in front of Face Plate	with out Gap	with out Gap	with out Gap
Main Spindle
Size of Threaded spindle	Ø 60 mm	Ø 60 mm	Ø 60 mm
Nose	8 TPI	8 TPI	8 TPI
Taper Bore in spindle Steeve	MT-3	MT-3	MT-3
Spindle Bore	38 mm	38 mm	38 mm
Spindle Speed	8 Nos.	8 Nos.	8 Nos.
Nos./Range	35 to 825 RPM	35 to 825 RPM	35 to 825 RPM
Tail Stock
Ram Diameter	38 mm	38 mm	38 mm
Taper Bore in Center Sleeve	MT-3	MT-3	MT-3
Ram Travel	115 mm	115 mm	115 mm
Compound Slide
Travel of Compound Slide	120 mm	120 mm	120 mm
Tool Shank Section	20 x 20 mm	20 x 20 mm	20 x 20 mm
Norton Gear Box
Lead Screw dia / TPI	Ø 25.4 / 4 TPI	Ø 25.4 / 4 TPI	Ø 25.4 / 4 TPI
Metric Thread	19 Nos.	19 Nos.	19 Nos.
Nos. / Range	From 0.5 to 8 mm	From 0.5 to 8 mm	From 0.5 to 8 mm
Inch Thread	23 Nos.	23 Nos.	23 Nos.
Nos. / Range	From 4 to 40 TPI	From 4 to 40 TPI	From 4 to 40 TPI
Electric Motor
Main Motor Supply	415 V, 3 PH, 50 HZ	415 V, 3 PH, 50 HZ	415 V, 3 PH, 50 HZ
Power KW/HP	0.75/1	0.75/1	0.75/1
Speed	1440 RPM	1440 RPM	1440 RPM

Note

Due to technology developments. The illustrations and specifications are not binding in detail and are subject to modification & improvement without prior notice.

Range Of Products

Belt Driven Lathes: 4.5' ti 34' with 200 mm to 1000 mm Centre Height
All Geared Lathes: 4.5' to 34' with 200 mm to 1000 mm Centre Height
Face Turning Lathes
Oil Country Lathes
Roll Turning Lathes

Standard Accessories: Hardened & Ground Bed, Dog Plat, Tool Post with spanner, 2 Nos. Dead Centres, Centre adaptor, Change Gear Set (for inch and mm), Thread Dial Indicator, Norton Gear Box, 1 H.P. Electric Motor with controls, Instruction Manual.

Extra Accessories: Extra Dog Plate, Face Plate Carrier Plate, Pin Type Steady Rest, Follow Rest, Taper Turning Attachment, Coolant Pump with Tank & Fittings, Machine Lamp, Revolving Centre, Pipe Centre, Tool-Post Grinder, Key Way Milling Attachment and switch shaft.

Salient Features

Robust IS 20/25 graded castings.
Rigid and box section type extra double walled construction wide bed provides maximum torsional stiffness.
Rigid and accurate, alloy steel, hardened & ground main spindle mounted on precision taper roller bearings on either side.
Extra heavy carriage and cross slide to withstand heave stock removal.

Versatility

Built-in gap bed.
Norton gear box for choosing a wide range of feeds & threads.
Wide variety of optional accessories for higher productivity.

Built-in Accuracy

All major castings artificially seasoned for retaining built in accuracy.
All components precision machined on import Substituted Mother Machines.
Hardened and ground bed for minimum wear.
Alloy steel lead screw.
Full length cross slide.
Each machine tested to Is-1878-1971.

Interchangeability

All components machined using jigs & fixtures on imported Mother Machines to close tolerance thus providing easy interchangeability.

Other Products in 'Lathe Machine' category

Lathe Machine	Extra Heavy Duty Lathe Machine	Light Duty Geared Lathe Machine

<< Back