|
Light Duty Geared Lathe Machine
Model: Trainer S-60
Range Of Products
- Belt Driven Lathes: 4.5" to 54" with 150 mm to 1500 mm Centre Height
- All Geared Lathes: 4.5" to 54" with 150 mm to 1500 mm Centre Height
- Face Turning Lathes
- Oil Country Lathes
- Roll Turning Lathes
- Radial Drill
Standard Accessories
Hardened
& Ground Bed, Dog Plate, Tool Post with spanner, 2 Nos. Dead
Centres, Centre adaptor Change Gear Set (for inch and mm) Thread Dial
Indicator, Norton Gear Box, 2 H.P. Electric Motor with controls.
Instruction Manual.
Extra Accessories
Extra
Dog Plate, Face Plate, Carrier Plate, Pin Type Steady Rest, Follow
Rest, Taper Turning Attachment, Coolant Pump with Tank & Fittings,
Machine Lamp, Revolving Centre, Pipe Centre, Tool Post Grinder, Key Way
Milling Attachment and Foot Brake, hardened and ground gear, switch
shaft.
Note
- Due to technological developments
The illustrations and specifications are not binding in detail and are
subject to modification & Improvement without prior notice.
Salient Features
- Robust IS 20/25 graded castings
- Rigid and box section type extra double walled construction wide bed provides maximum torsional stiffness.
- Rigid and accurate, alloy steel, hardened and ground main spindle mounted on precision taper roller bearings on either side
- Extra heavy carriage and cross slide to withstand heave stock removal.
Versatility
- Built-in gap bed
- Norton gear box for choosing a wide range of feeds and threads
- Wide variety of optional accessories for higher productivity.
Built-In Accuracy
- All major castings artificially seasoned for retaining built in accuracy
- All components precision machined on import Substituted Mother Machines
- Shaved alloy steel gears mounted on precision hobbed spline shafts and lay in oil bath
- Hardened and ground bed for minimum wear
- Alloy steel lead screw
- Full-length cross slide
- Each machine tested to Is-1878-1971
Inter changeability
All
components machined using jigs &fixures on imported Mother Machine
to close tolerance thus providing easy inter changeability.
Light Duty All Geared Lathe Machine Model: Trainer S-60
Capacity
|
150
|
165
|
175
|
Height Of Centre
|
150 mm
|
165 mm
|
175 mm
|
Swing Over Bed
|
295 mm
|
325 mm
|
345 mm
|
Swing over Cross slide
|
150 mm
|
180 mm
|
200 mm
|
Movement Of Cross Slide
|
215 mm
|
225 mm
|
225 mm
|
Swing in Gap
|
With out Gap
|
With out Gap
|
With out Gap
|
BED
|
Bed Type
|
2 'V' & 2 Flat
|
2 'V' & 2 Flat |
2 'V' & 2 Flat |
Bed Width
|
240 mm
|
240 mm
|
240 mm
|
Width of Gap in front of Face Plate
|
With out Gap
|
With out Gap |
With out Gap |
Main Spindle
|
Size of Threaded spindle nose
|
dia. 60 mm 8 TPI
|
dia. 60 mm 8 TPI |
dia. 60 mm 8 TPI |
Taper Bore in Spindle Sleeve
|
MT-3
|
MT-3 |
MT-3 |
Spindle Bore
|
38 mm
|
38 mm
|
38 mm
|
Spindle Speed
|
8 Nos.
|
8 Nos. |
8 Nos. |
Tail Stock
|
Ram Diameter
|
38 mm
|
38 mm |
38 mm |
Taper Bore in Center Sleeve
|
MT-3
|
MT-3 |
MT-3 |
Tam Travel
|
115 mm
|
115 mm |
115 mm |
Compound Slide
|
Travel of Compound Slide
|
120 mm
|
120 mm
|
120 mm
|
Tool Shank Section
|
20 x 20 mm
|
20 x 20 mm |
20 x 20 mm |
Norton Gear Box
|
Lead Screw dia. / TPI
|
dia. 25.4 / 4 TPI
|
dia. 25.4 / 4 TPI
|
dia. 25.4 / 4 TPI |
Metric Thread Nos.
|
19 Nos.
|
19 Nos. |
19 Nos. |
Range
|
From 0.5 to 8 mm
|
From 0.5 to 8 mm |
From 0.5 to 8 mm |
Inch Thread Nos.
|
23 Nos.
|
23 Nos. |
23 Nos. |
Range
|
From 4 to 40 TPI
|
From 4 to 40 TPI |
From 4 to 40 TPI |
Electric Motor
|
Main Motor Supply
|
415 V, 3 PH, 50 HZ
|
415 V, 3 PH, 50 HZ |
415 V, 3 PH, 50 HZ |
Power KW/HP
|
1.5 / 2
|
1.5 / 2 |
1.5 / 2 |
Speed
|
1440 RPM
|
1440 RPM |
1440 RPM |
BED Length (B.L.,)
|
|
|
|
Admit Between Centre (A.B.C.)
|
|
|
|
|
