|
Salient Features
- Robust IS 20/25 graded castings.
- Rigid and box section type extra double walled construction wide bed provides maximum torsional stiffness.
- Rigid and accurate, alloy steel, hardened and ground main spindle mounted on precision taper roller bearings on either side.
- Extra heavy carriage and cross slide to withstand heave stock removal.
Versatility
- Built-in gap bed.
- Norton gear box for choosing a wide range of feeds and threads.
- Wide variety of optional accessories for higher productivity.
Built-In Accuracy
- All major castings artificially seasoned for retaining built in accuracy .
- Shaved alloy steel gears mounted on precision hobbed spline shafts and lay in oil bath.
- All Components precision machined on import Substituted mother Machines.
- Hardened and ground bed for minimum wear.
- Alloy steel lead screw.
- Full length cross slide.
- Each machine tested to is-1878-1971.
Interchangeability
All components machined using jigs and fixtures on imported Mother Machines to close tolerance thus providing easy interchangeability.
|
Specification
|
Series Trainer
|
|
|
Model
|
65
|
100
|
|
Height Of Centre
|
200
|
200
|
|
Width of Bed
|
275
|
275
|
|
Swing Over Cross Slide
|
210
|
210
|
|
Swing over Saddle
|
260
|
260
|
|
Swing Over bed
|
400
|
400
|
|
Swing in Gap
|
630
|
630
|
|
Width of Gap in front of Face Plate
|
150
|
150
|
|
Admit- Between-Centres
|
650
|
1000
|
|
Technical Data
|
|
|
Spindle bore 9standard)
|
40
|
|
Morse Taper-Spindle and Sleeve
|
MT-6 / MT-4
|
|
Spindle Speed (Nos/Ranged)
|
8/55 to 1250 RPM
|
|
Spindle Nose Dia / Thread
|
60 / 6 TPI
|
|
Norton Gear Box
|
|
|
Feed Range
|
|
|
Longitudinal (mm/rev)
|
32/0.066 to 1.00 mm / REV
|
|
Cross (mm/rev)
|
32/0.017 to 0.250 mm /REV
|
|
Metric Threads Nos / Range
|
20/0.5 to 7.5mm
|
|
Inch Threads Nod / Range
|
36/4 to 60 TPI
|
|
Lead screw Dia / Threads
|
32/4 TPI
|
|
Cross Slide Travel
|
200
|
|
Compound Slide Travel
|
125
|
|
Tool Shank Section
|
20 x 20mm
|
|
Electrical
|
|
|
Coollant Motor (HP)
|
0.25
|
|
Vol.PH RQ.
|
415,3,50
|
|
Main Motor KW/HP
|
1.5/2.0
|
|
Tail Stock
|
|
|
Ran Diameter
|
50.8mm
|
|
Morse Taper in Ran
|
MT-4
|
|
Ram Travel
|
150
|
Range Of Products
- Belt Driven Lathes : 4.5' to 34' with 200mm to 1000mm Centre height
- All Geared lathes : 4.5' to 34' with 200mm to 1000mm Centre Height
- Face Turning lathes
- Oil Country Lathes
- Roil Turning Lathes
Standard Accessories
Hardened and Ground bed, Dog Plate, Tool post with spanner, 2 Nos. Dead Centres, Centre Adaptor, Change Gear Set (for inch and mm) Thread Dial indicator, Norton Gear box, 2 H.P. Electric Motor with controls, Instruction manual.
Extra Accessories
Extra Dog Plate, Face Plate, Carrier Plate, Pin Type Steady Rest, Taper Turning Attachment, Coolant pump with Tank and Fittings, Machine lamp, Revolving Centre, Pipe Centre, Tool-Post Grinder, Key Way Milling Attachment and Foot brake, hardened and ground gear, switch shaft.
Note: Due to technological developments. The illustration and specification are not binding in detail and are subject to modification and improvement without prior notice.
|
